Reviving Your Motorcycle: Essential Tips for a Smooth Start
Bringing life back into a motorcycle that's been sitting idle can seem daunting, but it's a necessary step to ensure your ride is safe and enjoyable. Whether it's your own motorcycle or a used one you've recently acquired, here's a comprehensive guide to get it running smoothly again.
Why Your Motorcycle Needs Attention
Motorcycles that have been sitting, even if they have low mileage, often require some work to get them running again. Many riders encounter this issue, as evidenced by the numerous calls we receive from customers struggling to start their motorcycles. While we don't offer a tech hotline, this article covers the basics to help you get started.
Focus on Two Key Systems: Electrical and Fuel
1. Electrical System: The electrical system is crucial, as it's the first thing you engage when starting your motorcycle. Here’s what you need to check:
- Battery: Ensure your battery is healthy. A fully charged battery should have around 12.67 volts. If it falls below 12 volts, charge it before attempting to start the motorcycle. If it can't hold a charge or lacks sufficient cranking amps, it needs to be replaced. Many auto parts stores can test batteries for free.
- Battery Tender: To maintain your battery, use a battery tender. This smart charger keeps the battery charged and balanced, ensuring it's ready to go when you are.
- Terminals and Ground: Check that the battery terminals are securely fastened. Also, locate the main ground wire and ensure it's properly connected.
- Fuse: If your battery is good but the motorcycle won't start, check the fuse. Swap it out if necessary, as sometimes fuses lose continuity without visibly burning out.
- Starter Relay: If everything seems fine but the motorcycle still won't start, the starter relay might need replacing. This component, also known as the starter solenoid, is often the culprit.
2. Fuel System: Old or poor-quality fuel can cause significant problems. Here’s how to ensure your fuel system is in top shape:
- Old Gas: Never leave old gas in your tank, carburetor, or fuel-injected system. Stale fuel can clog and gum up the system. If your motorcycle has been sitting, drain the old gas and refill it with fresh fuel.
- Fuel Stabilizer: To extend the life of your fuel, use a fuel stabilizer. Follow the instructions carefully.
- Carburetor Cleaning: A dirty carburetor can prevent your motorcycle from running smoothly. Clean it thoroughly or replace it if necessary. We have a detailed YouTube video on how to clean a carburetor and install a jet kit.
3. Spark Plug: The spark plug is another critical component. Check the electrode for signs of fouling (a dark, sooty appearance) and ensure the gap is correct. Test for spark by grounding the spark plug to the engine while starting the motorcycle, but be careful to avoid getting a shock.
Additional Tips
- Always perform a thorough inspection of your motorcycle before riding, especially if it's been in storage.
- If these steps are beyond your expertise, seek professional help. Find a local shop that can diagnose, repair, and maintain your motorcycle.
- Utilize resources from our website, including owner’s manuals and instructional videos.
Once your motorcycle is up and running, enjoy the ride! If you’re local, feel free to call us and set up an appointment with our professional technicians. Happy riding!