Motorcycle Grips, Fusion 2.0 Orange

Risk Racing Fusion 2.0 Grips

The Fusion Bonding system eliminates glue, wires, and slipping. The Fusion 2. 0 Grips are dual-density grips designed to minimize vibration and improve arm pump. The ergonomic 'wave' on the flange of the grip reduces pressure points between the rider's thumb and the grip flange. Easy application: clean your handlebar, apply the bonding strips, shake and spray the catalyst to the exposed bonding strips, quickly apply grips, and you're done.

Wave Ergonomics

The large flange of the moto grip has a slight bend to it. This bend reduces pressure points between the riders’ thumb and the grip flange, preventing blisters on the side of your thumb.

Gripping Ribs

The Moto grip features three minimal, but meaningful, ribs on the bottom side of the grip. These three ribs interact with your last two fingers, which provide most of the gripping power in your hand.

Dual Compound

Premium, a dual-compound grip that features great vibration damping and durability. The ends of these grips are double-walled reinforced to prevent damage during tip-overs.

Fusion Bonding System

Fusion Grips include the Fusion Bonding System kit. At first, the Fusion Spray acts as a lubricant for easy grip installation, but after it dries, it creates a lasting bond. The entire process is clean and simple, and bonds in about 10-15 minutes. Removal of the grips is the same process as any other grip.

Features:

• Ergonomic "Wave" Flange
• Two-finger gripping ribs
• Dual compound micro texture
• Double-walled grip end protection
• Fusion bonding system for fast no-slip installation

What's Included

• Moto/ATV Grip Pair
• Fusion Bonding System
• 2x bonding strips
• 1x catalyst spray bottle

If you ride a dirt bike then you know what it is like to have a grip that slips. Despite all your best efforts to properly glue and safety wire the grip securely in place, it inevitably slips creating an annoyance and a safety hazard. The act of gluing and wiring grips with specialty tools can be a hassle as well. The wire often breaks leaving a sharp point and wreaks havoc on both your hands and the grip. The gluing process is a mess and difficult to get consistent coverage between your grip and the bar due to the fact that the grip just pushes all the glue to one end or the other. Risk Racing created a simple and effective solution called Fusion Grip Tech. Fusion Grip Tech is a patent-pending bonding system that uses bonding strips and a spray-on catalyst. Simply peel and stick the bonding strips to your bars. Then spray the bonding strips with the supplied Fusion Catalyst and easily slip your grip into place. At first, the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond. The entire process is clean and simple. Additionally, Fusion Grip Tech comes packaged with the new Risk Racing Fusion 2.0 Grips. The Fusion 2.0 Grips are a high-quality, dual compound soft grip with a reinforced grip end and an ergonomically designed "wave" to the grip flange. This ergonomic "wave" on the flange of the grip reduces pressure points between the rider's thumb and the grip flange. Although this patent-pending design feature is subtle, it greatly reduces heat and pressure, which reduces blistering and increases rider comfort. Thanks to the Risk Racing Fusion 2.0 Grips you can say goodbye to "Yama-thumb"!.

RISK Racing is based in Mooresville, NC USA, and we are here for you! We design products from the ground up and take great pride in what we create. Making sure every customer is happy with their RISK product purchase is a priority. Whether it's questions or concerns, we are here with answers. Our customer service team offers personal service and strives to ensure every customer is 100% satisfied with our product. Due to our unique innovation, we are targets of copy products. Please beware of imitations.