In this video, you will learn how to remove and reinstall the rear wheel on the CSC Motorcycles RX1E electric motorcycle, a new and exciting model that is now available and being shipped to customers. The RX1E is a friendly and efficient way to get into the electric-vehicle market, with a liquid-cooled motor that delivers 24 hp and 61.2 lb-ft of torque, a twist-and-go operation, and a reverse gear for easy maneuvering. The RX1E also has three ride modes, electronic cruise control, and a range of 112 miles based on the New European Driving Cycle. Whether you need to change a tire, adjust the chain, or perform other maintenance tasks, this video will guide you through the steps of removing and reinstalling the rear wheel on the RX1E.
The video shows you how to use a few simple tools, such as an 8mm socket, a 12mm socket, a 14mm socket, a 19mm socket, and a 13mm wrench, to detach the brake caliper and the ABS sensor, loosen the axle nut and the adjusting plate, remove the belt and the axle, and take off the rear wheel. You will also learn how to identify the spacers and the caliper mounting plate, and how to put them back in place when reinstalling the wheel. The video demonstrates how to align the belt and adjust its tension using the adjusters and the locking nuts. Finally, you will see how to reattach the brake caliper and the ABS sensor and tighten the axle nut.
To learn more about the RX1E and other CSC electric vehicles, visit cscmotorcycles.com.