Product Overview
PART #16 ON ILLUSTRATION: ELECTRICAL PARTS
For: City Slicker Controller assembly
Sold Each
The motor controller is the "brain" of your CSC City Slicker. It manages the flow of electricity from the 72V battery to the motor, translating your throttle input into smooth, precise acceleration.
This is the factory-original replacement ZWK072060A assembly, ensuring a plug-and-play fit with your existing wiring harness.
Technical Details:
- Model Number: ZWK072060A / 84100-F1T5-000001
- Input/Output: 1x 30-Pin Main Plug, 1x 6-Pin Plug
- Terminals: High-current screw-in points for B-, W, V, U, B+
- Configuration: M6.V121 Firmware (City Slicker Tuning)
Symptoms of a Failing Controller:
Replacing the controller is the primary fix for the following common issues:
- Dead Throttle: Bike powers on, but the motor does not respond to input.
- Motor Stuttering: The motor "cogs" or vibrates instead of rotating smoothly (often a failed phase circuit).
- Thermal Shutdown: The bike runs for a few minutes and then cuts out entirely until it cools down.
- Burnt Terminals: Visible melting or heat damage at the U, V, or W motor phase connections.
Note: It is recommended to check your motor phase wires and battery health before replacing the controller to ensure an external short didn't cause the original failure.
California Prop 65 Warning - This store sells products that contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Contact CSC Motorcycles with any questions or concerns about the products you are purchasing. For more information